Trenchless Utility

Bits and Hammers

Back to Trenchless Utility

Bit Blades

Designate bit width – design – bit thickness - # of holes in bit pattern.

Choose from our bit profiles – Regular Point – Steep Taper or Chisel Bit.

  • Image of Chisel Bit Blade
    Chisel Bit
  • Image of Carbide Bit Blade
    All Carbide Bit. Our most aggressive cutting bit.

Directional Bit Range

  • Image of Regular Point Directional Bit Range
    Regular Point
  • Image of Steep Taper Directional Bit Range
    Steep Taper
  • Image of Chisel Point Directional Bit Range
    Chisel Pint
  • Image of Button Bit Directional Bit Range
    Button Bit
  • Image of All Carbide Directional Bit Range
    All Carbide
  • Image of Conical Directional Bit Range
    Conical
  • Image of Steep Al Carbide Directional Bit Range
    Steep All Carbide

Bits for Jet Track® Drills

Image of Regular Point Bits for Jet Track Drills

Regular Point

Image of Chisel Bit for Jet Track Drills

Chisel Bit

Image of Steep Taper Bits for Jet Track Drills

Steep Taper

Image of Button Bit for Jet Track Drills

Button Bit

Image of All Carbide Bits for Jet Track Drills

All Carbide

Image of Conical Bits for Jet Track Drills

Conical Bit

Image of Steep All Carbide Bits for Jet Track Drills

Steep All Carbide

Bits below are 5/8 inch thick with a 10 degree bend 5 hole pattern.

Bit Width (inches) Part Number,
Regular Taper 920's and 1720's
Part Number,
Steep Taper 920's and 1720's
Part Number,
Chisel Point 920's and 1720's
3 43000 43001 43002
4 43003 43004 43005
5 43006 43007 43008
6 43009 43010 43011

Bits below are ¾ inch thick and have a 10 degree bend 6 hole pattern.

Bit Width (inches) Part Number,
Regular Taper 2720's
Part Number,
Steep Taper 2720's
Part Number,
Chisel Point 2720's
4 43012 43013 43014
5 43015 43016 43017
6 43018 43019 43020

Bits below are 1 inch thick have 0 degree bend 6 hole pattern.

Bit Width (inches) Part Number,
Regular Taper 4020's and 7020's
Part Number,
Steep Taper 4020's and 7020's
Part Number,
Chisel Point 4020's and 7020's
5 43021 43022 43023
6.5 43024 43025 43026
8 43027 43028 43029
9.5 43030 43031 43032

Bits in selection are 1 inch thick & 10 degree bend 5 bolt pattern.

Bit Width (inches) Part Number Regular Button Bit 920's and 1720's Part Number Steep All Carbide 920's and 1720's
3 43033 43034
4 43035 43036
5 43037 43038
6 43039 43040

Bits in selection below are 1 inch thick & 10 degree bend 6 bolt pattern.

Bit Width (inches) Part Number Regular Button Bit 2720's Part Number Steep All Carbide 2720's
4 43041 43042
5 43043 43044
6 43045 43046

Bits in selection below are 1 inch thick & 0 degree bend 6 bolt pattern.

Bit Width (inches) Part Number Regular Button Bit 4020's and 7020's Part Number Steep All Carbide 4020's and 7020's
5 43047 43048
6.5 43049 43050
8 43051 43052
9.5 43053 43054

Bits in selection are 1 inch thick & 10 degree bend 5 hole pattern.

Bit Width (inches) Part Number Conical Bit 920's and 1720's Part Number Steep All Carbide 920's and 1720's
3 43055 43056
4 43057 43058
5 43059 43060
6 43061 43062

Bits in selection below are 1 inch thick & 10 degree bend 6 hole pattern.

Bit Width (inches) Part Number Conical Bit 2720's Part Number Steep All Carbide 2720's
4 43063 43064
5 43065 43066
6 43067 43068

Bits in selection below are 1 inch thick & 0 degree bend 6 hole pattern.

Bit Width (inches) Part Number Conical Bit 4020's and 7020's Part Number Steep All Carbide 4020's and 7020's
5 43069 43070
6.5 43071 43072
8 43073 43074
9.5 43075 43076
Back to Trenchless Utility Top

Bits for Navigator® Drills

Image of Regular Point Bits for Navigator Drills

Regular Point

Image of Steep Taper Bits for Navigator Drills

Steep Taper

Image of Chisel Bit for Navigator Drills

Chisel Bit

Image of Button Bit for Navigator Drills

Button Bit

Image of All Carbide Bits for Navigator Drills

All Carbide

All Bits below for Navigator® drills are 5/8 inch thick & 10 degree bend 7 bolt pattern.

Bit Width (inches) Part Number Regular Taper Part Number Steep Taper Part Number Chisel Point
3 43077 43078 43079
4 43080 43081 43082
5 43083 43084 43085
6 43086 43087 43088

All Bits below are 5/8 inch Thick & 10 degree bend, 7 bolt pattern.

Bit Width (inches) Part Number Button Bit Part Number Steep All Carbide Bit
3 43089 43090
4 43091 43092
5 43093 43094
6 43095 43096

The all carbide bit is inlaid with carbide across the entire face of the bit and further protected with tungsten carbide hard facing. Its our most aggressive cutting bit for heavy cobble and broken rock formation.

Button Bit with its large carbide buttons make this an aggressive cutter in hard packed clay, shale and packed gravel.

Bit Width (inches) Part Number Button Bit Part Number Steep All Carbide Bit
3 43089 43090
4 43091 43092
5 43093 43094
6 43095 43096
Bit Width (inches) Part Number Button Bit Part Number Steep All Carbide Bit
3 43097 43098
4 43099 43100
5 43101 43102
6 43103 N/A

The Steep All Carbide bit is inlaid with carbide across the entire face of the bit and further protected with tungsten carbide hard facing. Its our most aggressive cutting bit for heavy cobble and broken rock formation and slightly more maneuverable than the regular All Carbide.

The Conical Bit with its large carbide tipped cutters provide for exceptional penetration in debris.

Back to Trenchless Utility Top

PCD Drilling Bits

Image of PCD Drilling Bits

Obtain maximum production from our PCD Bits which used worldwide with quality and dependability that is unmatched. Call Tube Technologies and talk with one of our specialist on the critical specifications for your PCD Bit.

Directional DTH Hammers

Image of Mincon Directional DTH Hammer Machine

Mincon has developed a range of steerable tools over the last decade for hard rock drilling specifically for the Horizontal Directional Drilling Industry. The tools are for use in medium to hard rock formations where an alternative to conventional drilling is required to maintain productivity.

The Mincon Hardrock range offers the most complete line of steerable hammer systems on the market.

  • HDD30 – 3 ½” Pilot Bore
  • HDD40 – 4 ¼” Pilot Bore
  • HDD50 – 5 ¼” Pilot Bore
  • HDD60 – 6 ¼” Pilot Bore

Mincon Hardrock Hammer Systems utilize “High Frequency Cycle” technology. Mincon Hardrock is the only manufacturer of Steerable Hammers that incorporate this feature.

Call Tube Tech at 1 800 – 536 5875 for a quick quote and more details.

Back to Trenchless Utility Top